南華大學機構典藏系統:Item 987654321/26759
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 18278/19583 (93%)
造訪人次 : 1024664      線上人數 : 733
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: http://nhuir.nhu.edu.tw/handle/987654321/26759


    題名: A Rule Based Assembly Sequence Generation Method for Product Design
    作者: 林銘泉;Lin, Ming-Chyuan;Tai, Yuan-Yeuan;Chen, Ming-Shi;Chang, C. Alec
    貢獻者: 創意產品設計學系
    關鍵詞: product design;assembly sequence;contact relation matrix;matrix representation
    日期: 2007-09
    上傳時間: 2019-02-20 15:38:59 (UTC+8)
    摘要: In concurrent engineering, the integration of the designers' knowledge and experience, and computer technology into the design process is very important to improve design quality and production efficiency. A feasible design alternative that follows the design rules for assembly will make product manufacturing and assembly more successful. However, designers seldom consider assembly problems in their product development processes. This drawback often occurs due to conflicts in communication between the design and production departments and will cause severe assembly and manufacturing problems. To assist designers with the assembly issue in the design process this research presents a contact relation matrix (CRM) approach to generate assembly sequences for product design. The procedure developed for the CRM approach is based on the four rules identified from the part contact relations and a matrix representation to match the recommended design alternative with the four rules. A procedure is then employed to identify the assembly priority for the recommended design alternative. The part assembly sequence is generated with a sorting procedure. A hand-held hairdryer and an Italian style coffee maker are used as cases to help explain the feasibility of the CRM approach. The results from this study should help designers to examine the possible part combinations and make the necessary modifications for the recommended design alternative. The CRM approach can also be linked with an existing matrix approach in generating and evaluating design alternatives. By integrating the CRM and matrix approaches, the design quality and efficiency will be greatly improved.
    關聯: Concurrent Engineering: Research and Applications
    Vol. 15, no. 3
    pp.291-308
    顯示於類別:[產品與室內設計學系] 期刊論文

    文件中的檔案:

    沒有與此文件相關的檔案.



    在NHUIR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋