南華大學機構典藏系統:Item 987654321/26763
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 18278/19583 (93%)
造访人次 : 913329      在线人数 : 115
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://nhuir.nhu.edu.tw/handle/987654321/26763


    题名: A modularized contact-rule reasoning approach to the assembly sequence generation for product design
    作者: 林銘泉;Lin, Ming-Chyuan;Lin, Chen-Cheng;Tai, Yuan-Yeuan;Chen, Ming-Shi;Tseng, Ching-Chi
    貢獻者: 創意產品設計學系
    关键词: Product design;assembly sequence;contact relation matrix;matrix representation;concurrent engineering
    日期: 2012-09
    上传时间: 2019-02-20 15:39:15 (UTC+8)
    摘要: Concurrent engineering design is widely used to shorten the time needed to introduce a new product and to enhance the quality of the design of the product. However, designers seldom consider the difficulty of assembling a product’s components and modules in the concurrent development process. In fact, the concept of design for assembly is not new. Planning the execution of assembly operations and selecting the assembly sequence during product development will provide designers with interrelated information of design and manufacture that help reduce manufacturing problems. The designer should realize that a reasonable assembly sequence for a product has a significant effect on the efficiency of the entire assembly process. This research focuses on the enhancement of the contact relation matrix approach to the generation of assembly sequences in a product design procedure. A systematic and efficient assembly sequence assistance procedure is proposed to generate feasible assembly sequences and to find an optimal sequence to assemble the product. Compared to the complexity of other methods, this research proposes a modularized contact-rule reasoning approach to generating assembly sequences. The general approach of this research is to (a) develop a modular method for assembly sequence planning, (b) use matrix operations to facilitate the generation of assembly sequences, and (c) generate the assembly sequence of the designed product by searching for subassembly extraction rules. The assembly sequences are then created in the form of a hierarchical structure. The results will assist designers to consider and reduce some manufacture problems in advance that might occur in the process of generation of the recommended design alternative.
    關聯: Concurrent Engineering: Research and Applications
    Vol. 20, no. 3
    pp.203-221
    显示于类别:[產品與室內設計學系] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML251检视/开启


    在NHUIR中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈